Etouchworld

The installation of Brass Compression Fittings In your residense

by deiva on Sep.06, 2010, under General

How do you think water gets to your own kitchen sink all the way from the neighborhood standard water tank supply? So how exactly does the plumbing manage water circulation to the comfort room, or to the kitchen sink, or both at the same time? Why is your jobless neighbor so interested in repairing your water line leak for you?

Simply because it’s easy. Brass Compression Tube Fittings make almost everything about plumbing effortless.

First, the basics. A compression fitting is an easy tool employed in electrical conduit systems and also basic household plumbing to plug two tubes or pipes together. It is a three-part device, and is one of the most widely used as well as commonly-used type of fitting in the industry for one reason alone: brass fittings are utilized to attach the ends of 2 incompatible tubes or pipe together, say for example a copper and a PVC pipe. That is something you don’t hear every day.

If you need to install or else fix a dripping brass fitting on your water line, you better know very well what you’re doing. Here’s a step-by-step instruction guide to assist you.

What you need:
• Compression fitting
• Two crescent wrenches
• Emory cloth
• Plumbing thread
• Sealant (optional)

Instructions:
1.Take a sheet of emory cloth and use it to clean off the end of the copper tube. Slide the compression nut, just one piece of the brass fitting, over one end of the copper tubing accompanied by the compression ring, the 2nd piece.

2.Slide the actual compression fitting slowly into the open end of the copper pipe. Then slide both the compression nut and compression ring towards the fitting.

3.Use 2 crescent wrenches to fit the actual compression nut and brass fitting.

4.Positioning the crescent wrench steadily with one hand, turn the other crescent wrench to the right to tighten up the compression nut and brass fitting together, compressing the ring onto the copper tube and create a lasting bond. This properly seals the brass fitting into place.

5.Turn the water back on and search for leaks. If everything remains dry, give yourself a pat on the back for a job well done!
Brass fittings are typical for domestic water lines however it does not mean they do not have their disadvantages. The most common issue about brass fittings is their being prone to permanent damage and leaks even from the smallest movement. To put it simply brass compression fittings aren’t as sturdy as the soldered fitting type.

However every unfortunate story has its surprise twist ending. Brass compression fittings are as adaptable, just about, as any type of fitting could possibly be. There are two types: the standard fitting that require no modification and common in compressed air and water connections, as well as the flare fittings that require modifications and utilized in high pressure gas lines. Both kinds of brass Compression Tube Fittings are employed in household and industrial settings.

A compression fitting is a crucial and indispensable element of your home, your life. You don’t see or hear about it every day. But it’s there, making life more convenient, without you knowing it.

Bookmark and Share

9 Comments for this entry

5 Trackbacks / Pingbacks for this entry

Leave a Reply

You must be logged in to post a comment.

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!